Cordless Drill Box 21V Cordless Drill & Screwdriver Set – 3-in-1 Hammer Drill with 2 Batteries, 25+3 Torque Settings, LED Light & Tool Case

• 3-in-1 function: screwing, drilling and hammer drilling in one tool, changed by a collar rather than by changing tools.
• Two batteries, not one: swap packs and keep working instead of stopping for a charge. A full recharge takes around 90 minutes.
• 25+3 torque control: 25 clutch positions plus drill and hammer modes, so you can set the tool to the material instead of leaning on the trigger.
• A kit, not just a drill: bits, sockets, a flexible shaft, pliers, a utility knife, tape, a tester and a measuring tape, all in the carry case.

• Voltage: 21V (maximum, no-load)
• Max torque: 38N.m
• Speed settings: 2-speed — 0–350RPM / 0–1350RPM
• Clutch positions: 25 + 3 (drill / hammer / screw modes)
• Chuck: 10mm (3/8") keyless, quick-change
• Battery: 2 × 1.5Ah (1500mAh) Li-ion
• Charging time: approximately 90 minutes for a full charge
• Extras: LED work light, battery level indicator, belt clip, soft grip
• Case: fitted tool kit box

• 1 × cordless drill
• 2 × 1500mAh 21V lithium-ion batteries
• 1 × charger
• 1 × tool kit box
• 6 × drill bits
• 4 × screwdriver bits
• 1 × flexible shaft driver
• 9 × sockets
• 2 × socket adapters
• 1 × PVC insulation tape
• 1 × utility knife
• 1 × pliers
• 1 × digital display tester
• 1 × measuring tape

Two honest points on capability. The 21V figure is the maximum no-load voltage, which is how this whole class of tool is rated — the nominal working voltage is lower, and that is normal, not a defect. And with a 10mm chuck and 38N.m of torque, the hammer mode is intended for light masonry such as brick, plaster and soft block. It is a home and workshop drill, not a rotary hammer for structural concrete.

• Wear safety glasses whenever the tool is running. Drilling throws chips and dust.
• Check behind the surface for electrical wiring and water pipes before you drill into any wall.
• Remove the battery before changing bits, adjusting the chuck or storing the tool.
• Tie back long hair and avoid loose clothing, jewellery and gloves near the rotating chuck.
• Use only the supplied charger, charge on a hard non-flammable surface, and do not leave batteries charging unattended overnight.
• Do not charge, use or store lithium-ion batteries in direct sun, in a hot vehicle, or anywhere damp. Stop using a pack that is swollen, damaged or unusually hot.
• Hold the tool firmly with both hands on larger bits — the drill can twist sharply if the bit binds.
• Keep the tool, batteries, bits and knife well out of reach of children. This is not a toy.
• Indoor and dry-site use. Keep away from rain and moisture.

• Hand-picked stock. Every item we list is chosen for build quality before it reaches our store.
• Honest listings. We publish real specifications, including the limitations, so nothing arrives as a surprise.
• Dedicated support. A real person answers questions before and after your order.
• Secure checkout. Your order is processed safely from cart to doorstep.